Section I:
Metal surface preparation for varnish-and-paint coatings agents.
1. Detergents
2. Activating agents
3. Phosphating concentrates
4. Passivating agents
5. Coagulants for spray cabinets
Section II:
Agents for metal treatment before the cold strain process
1. Washing agents
2. Activating agents
3. Phosphating concentrates
4. Agents for wire sub-lubricant coating
Section III:
Special purpose phosphating concentrates
Section IV:
Lubricant-cooling liquids Conservation draw-downs
Section V:
Dielectric agents
Section VI:
Inorganic bondings
Section VII:
Household chemicals
Section VIII:
Other products
Section IX:
Preservatives and antipyrines
Section X
Fire-extinguishing powders
SECTION I
1. DETERGENTS
Technical detergent Phoscon-200, technical specifications 2149-179-109640029-2004, ed. 1,2
The agent possesses high washing capacity (>95%), intended for low-temperature metal washing and metal surface deoiling before various coating operations
Technical washing agent Phoscon 202, technical specifications 2149-129-109640029-2000, ed. 1,2
Intended for metal deoiling by spraying or dipping while surface preparation for painting. Composition possesses good deoiling properties.
Technical detergent Phoscon-200, technical specifications 2149-142-109640029-2001, ed. 1,2,3
Intended for metal surface deoiling by spraying or dipping before plating, painting, phosphating and parts cleaning from oily and resiny scummings while repairing at enterprises.
Washing agent Phoscon 205, technical specifications 2149-067-10964029-97, ed. 1
Intended for metal surface deoiling in baths of spray or submersible type. Possesses reduced foaming.
Washing agent Phoscon 206, technical specifications 2149-174-10964029-2004, ed. 1
Intended for deoiling of galvanized or carbon steel in coils before phosphating or varnish-and- paint coating at speed continuous lines and for other purposes.
Phoscon 214 agent, technical specifications 2149-246-10964029-2005
Intended for metal surface deoiling by spraying or dipping before the industrial processes of coiled stock protective coating and for metal deoiling before phosphating, plating and for other purposes. Phoscon 214 is a liquid alkali agent.
2. ACTIVATING AGENTS
Phoscon 471 phosphating activator, technical specifications 2149-095-10964029-2002, ed. 1
Intended for metal surface treatment before phosphating to reduce phosphating time, mass and thickness of phosphate layer; increase of protective physics-mechanical characteristics of varnish-and-paint coating in combination with phosphate layers; reduce chemicals consumption for phosphating.
Method of treatment — spraying or dipping.
3. PHOSPHATING CONCENTRATES
A. Cataphoresis varnish-and-paint coating
Phosphating concentrate Phoscon 18, technical specifications 2149-050-10964029-94, ed. 1,3,4.
Intended for galvanized or carbon steel phosphating to increase adhesion and protective properties of varnish-and-paint coating before cathode or anode deposition. Method of treatment — spraying or dipping.
Phosphating concentrate Phoscon 19, technical specifications 2149-112-10964029-2005
Intended for galvanized or carbon steel low-temperature phosphating to increase adhesion and protective properties of varnish-and-paint coating before cathode deposition. Method of treatment — combined spraying.
Phosphating concentrate Phoscon-N-2, technical specifications 2149-155-10964029-2002
Intended for low-temperature phosphating of steel surface, fine crystalline coating formed. Method of treatment — spraying or dipping before varnish-and-paint coating.
B. Anaphoresis varnish-and-paint coating
Phosphating concentrate Phoscon-N-2, technical specifications 2149-155-10964029-2002
Intended for low-temperature phosphating of steel surface, fine crystalline coating formed. Method of treatment — spraying or dipping before varnish-and-paint coating.
Phosphating concentrate Phoscon 4, technical specifications 2149-116-10964029-2000, ed.1
Intended for carbon steels phosphating to increase adhesive and protective properties of varnish- and-paint coating before anode deposition. To increase adhesive and protective properties of low alloy mechanically protected steel coatings.
Phosphating concentrate Phoscon 18, technical specifications 2149-050-10964029-94, ed.1, 3,4
Intended for galvanized or carbon steel phosphating to increase adhesion and protective properties of varnish-and-paint coating before cathode or anode deposition. Method of treatment — spraying or dipping.
Phosphating concentrate Phoscon 37, technical specifications 2149-220-10964029-2004
Intended for low-temperature phosphating of carbon or galvanized steel surface, fine crystalline phosphate coating formed, before varnish-and-paint coating by electrodeposition of powder coating to increase adhesive id protective properties of varnish-and-paint coating. Method of treatment — spraying.
C. Other kinds of varnish-and-paint coatings.
Phosphating concentrate Phoscon 9, technical specifications 2149-111-10964029-99, ed.1
Intended for carbon steels phosphating to increase adhesive and protective properties of varnish- and-paint coatings before painting. Method of treatment — spraying or dipping.
Phosphating concentrate Phoscon 14, technical specifications 2149-123-10964029-2000, ed.1
Intended for simultaneous deoiling and low-temperature phosphating of carbon steels before painting. Method of treatment. — spraying
Phosphating concentrate Phoscon 15, technical specifications 2149-001-10964029-94, ed.1
Intended for cold amorphous steel phosphating, provides good protective and physical- mechanical properties of VPC. Method of treatment — spraying.
Phosphating concentrate Phoscon 24, technical specifications 4931-047-10964029-93, ed.1
Intended for simultaneous deoiling and phosphating of steel before all kinds of painting including powder. Makes amorphous iron-phosphate coating.
Possesses reduced foaming. Method of treatment — spraying. The agent is used for plastic parts
treatment before their painting for better physical-mechanical properties of VPC.
Phosphating concentrate Phoscon 25, technical specifications 2149-121-10964029-2000, ed.1
Intended for simultaneous deoiling and phosphating of steel, hot-galvanized and electrolytically-galvanized steel before all kinds of painting including powder; for simultaneous deoiling and phosphating of aluminium, steel, hot-galvanized and electrolytically-galvanized steel. Method of treatment — spraying.
Phosphating concentrate Phoscon 28, technical specifications 2149-137-10964029-01, ed.1
Intended for phosphating of steel parts before oiling and low-temperature phosphating before painting. Method of treatment — dipping.
Phosphating concentrate Phoscon 29, technical specifications 2149-075-10964029-2001, ed.1
Intended for steel parts phosphating before painting for making of phosphate layer from greyish- green to dark-green, 1,5-3,0 k/m3 thick. Possesses good sub-film corrosion protection. Method of treatment — spraying.
Phosphating concentrate Phoscon 49, technical specifications 2149-235-10964029-2007
Intended for low-temperature steel phosphating before painting (iron-phosphate coating formed)
4. PASSIVATING AGENTS
Chromate-free passivator Phoscon 485, technical specifications 2149-177-10964029-2003
Chrome-free agent intended for steel surface treatment including phosphating to increase corrosion resistance of VPC and for treatment while interoperational period.
5. COAGULANTS FOR SPRAY CABINETS
Coagulant for spray cabinets Phoscon 501, technical specifications 2163-102-10964029-99, ed.1
Intended for coagulation of melamine-alkid and epoxy varnish-and-paint materials water solutions in hydrofilters of spray cabinets.
Zink-containing agent for waste-water neutralization Phoscon 502, technical specifications 2149-066-05027788-94, ed.3
Intended for neutralization of waste-water of steel phosphating and varnish-and-paint production.
SECTION II
AGENTS FOR METAL TREATMENT BEFORE THE COLD STRAIN PROCESS
Washing agent Phoscon 201, technical specifications 2149-171-10964029-2002, ed.1,2
Intended for metal parts surface cleaning in machine-building, transport, agricultural sector from resiny and oily foulings, at coating of various types, repairing at interoperational period and before painting.
Washing agent Phoscon 203-1, technical specifications 2499-110-10964029-99, ed.1,2,3,4
Intended for metal surface deoiling at interoperational period before painting, before coating of various types and at high-speed metal treatment.
Technical washing agent Phoscon 204, technical specifications 2149-142-10964029-2001, ed.1,2,3
Intended for deoiling of metal surface by spraying or dipping before galvanizing, painting, phosphating and parts cleaning from oily and resiny foulings while repairing at enterprises.
Washing agent Phoscon 211, technical specifications 2149-156-10964029-2001
Intended for deoiling of metre surface before galvanizing, painting, phosphating and parts cleaning from rust-preventing grease and consumption pollution.
Phoscon 216 agent, technical specifications 2149-250-10964029-2005
Intended for collateral deoiling and passivating of metal surface at interoperational period. Interoperational period protection - No less than 30 nets,
Phoscon 217 agent, technical specifications 2149-251-10964029-2005
Intended for deoiling of metal-rolls at continuous treatment aggregates before coating application of various types and for metal deoiling by spraying or dipping before phosphating, galvanizing and for other purposes.
Phoscon 217 makes liquid alkali agent.
Technical washing agent Phoscon 218, technical specifications 2149-253-10964029-2005
Intended for metal surface cleaning from all types of foulings.
Washing agent Phoscon 220, technical specifications 2149-260-10964029-2005
The agent possesses high washing capacity (>95%), intended for low-temperature metal washing and deoling of metal surface before various types of coating application.
Recommended environment for washing agents may change depending from usage conditions, technology, fouling factor and kind of treated surface.
2. ACTIVATING AGENTS
Phosphating activator Phoscon 470, technical specifications 2149-196-10964029-2003, ed.1
Intended for metal surface treatment at washing after alkali deoiling or acid etching for decrease of mass or size of phosphate coating crystals.
Method of treatment — dipping or high-speed drawing.
Phosphating activator Phoscon 472, technical specifications 2149-070-10964029-2004
Intended for metal surface treatment before phosphating to increase phosphating rate and to get fine-crystalline phosphate coating of higher quality after sulfuric and hydrochloric acid etching before cold deformation operations (including wire) and painting.
Method of treatment — spraying and dipping.
3. PHOSPHATING CONCENTRATES
Phosphating concentrate Phoscon 5, technical specifications 113-12-90-88, ed.1,2,3,4
Intended for steel surface phosphating before cold deformation operations, oiling, painting and for getting scuff-resistant coatirig. The concentrate is self-correcting and intended for wide range. of temperatures (20-70 C). Method of treatment — dipping.
Phosphating concentrate Phoscon 6, technical specifications 301-06-21-90, ed.2
Intended for getting an anti-friction phosphate coating at metal surface preparation for pressure treatment and for getting phosphate coatings for steel before extrusion, drawing and cold heading.
Phosphating concentrate Phoscon 7, technical specifications 301-06-22-90, ed.1,2
Intended for getting an anti-friction phosphate coating at metal surface preparation for pressure treatment and for getting phosphate coatings for steel before extrusion, drawing and cold heading. Provides stable correction of working solution prepared with the use of Phoscon 6 agent simultaneously with the process of phosphating.
Phosphating concentrate Phoscon 8, technical specifications 2149-078-10964029-97, ed.1
Intended for phosphating of steel and iron products before oiling (corrosion protection while interoperation period) and before cold deformation operations for corrosion protection and working bath correction. Method of treatment — dipping.
Phosphating concentrate Phoscon 10, technical specifications 113-12-70-87, ed.2,3
Used before the operations of cold deformation (including dry or wet drawing of high-carbon wire with 90% shrinkage) by dipping or high-speed drawing.
Phosphating concentrate Phoscon 11, technical specifications 113-12-71-87, ed.2,3,4
Intended for the correction of working bath prepared on the basis of phosphating concentrate Phoscon 10.
Phosphating concentrate Phoscon 12A, Phoscon 12AM, Phoscon 12K, technical specifications 2149-109-10964029-2003, ed.1
Phosphating concentrate Phoscon 12A is used for the preparation of working phosphating solution intended for steel surface phosphating (including wire) by dipping or by high-speed method with the following saponification before the operations of cold deformation (stamping, drawing, heading of fittings) or with the following oiling for corrosion protection.
Thanks to special crystal structure of phosphate layer the coating possesses high capability of grease holding and high anti-corrosion properties.
Phosphating concentrate Phoscon 12AM is tised for the preparation of working phosphating solution intended for steel surface phosphating by dipping with the following saponification before the operations of cold deformation (stamping, extrusion). Phosphating concentrates l2A, 12AM are intended for the correction of working phosphating solution at losses of more than 10%.
Phosphating concentrate Phoscon 12K is intended for the correction of working phosphating solutions prepared from the concentrate Phoscon 12A in the process of application for the replenishment of solution components and for having phosphate coating of stable quality.
Phosphating concentrate Phoscon 16, technical specifications 113-080525-82, ed.6
Intended for steel surface phosphating (including wire) by dipping and high-speed method before their oiling with further deoiling and cold deformation — stamping, extrusion, rolling.
Phosphating concentrate Phoscon 22, technical specifications 2149-058-10964029-96, ed.2,3
Issued in two brands. Reduced slurry concentrate, brand A intended for steel surface phosphating before the operations of cold deformation (including pipes). Brand B is intended for the correction of working phosphating solution while working process. Phosphate coating possesses high anti-corrosion properties. It is optimal for the production of cold-drawn pipes. Method of treatment — dipping.
Phosphating concentrate Phoscon 23, technical specifications 2149-074-10964029-97, ed.1,2
Intended for carbon steels phosphating to increase adhesive and protective properties of varnish- and-paint coating before anode deposition. Method of treatment — spraying.
Phosphating concentrate Phoscon 24, technical specifications 4931-047-10964029-93, ed.1
Intended for simultaneous deoiling and phosphating of steel before all types of painting including powder. Makes amorphous iron-phosphate coating.
Possesses reduced foaming. Method of treatment — spraying. The agent may be used for treatment of plastic parts before painting to increase physical-mechanical properties of VPC.
Phosphating concentrate Phoscon 26, technical specifications 113-08-428-83, ed.6
Universal concentrate. Due to wide range of phosphating parameters it can be used for phosphating steel surface before cold deformation, oiling, polymer coatings application.
Phosphating concentrates Phoscon 33, Phoscon 33K, technical specifications 2149-101- 10964029-99, ed.1
Phosphating concentrate Phoscon 33 is intended for metal phosphating in autocatalytic mode, by dipping and high-speed drawing before cold formation operations.
Phosphating concentrate Phoscon 33K is intended for the correction of working phosphating solution while operation.
Phosphating concentrates Phoscon 35, Phoscon 35M, Phoscon 35K, Phoscon 35KM, 2149- 205-10964029-2004, ed.1,2,3
Phosphating concentrates Phoscon 35, Phoscon 35M are intended for metal phosphating by dipping or high-speed drawing before cold deformation operations.
Phosphating concentrates Phoscon 35K (for auto-catalytic mode) and Phoscon 35KM are intended for the correction of working phosphating solution while operation for the replenishment of solution components consumption and for stable quality of phosphate coating.
Phosphating concentrate Phoscon 46, technical specifications 2149-235-10964029-2005, ed.1,2
Used for the preparation of working phosphating solution and its correction while operation, intended for galvanic-phosphate coating application by dipping on steel parts or wire with the following cold deformation, oiling and other technological operations.
Phosphating concentrate Phoscon 55, technical specifications 2149-245-10964029-2005
Intended for cold phosphating of steel parts before painting, oiling and cold deformation by dipping and for anti-scuffing coating.
4. AGENTS FOR WIRE SUB-LUBRICANT COATING
Concentrate Phoscon 520, technical specifications 2146-076-10964029-97, ed.1
Used for sub-lubricant coating at high or low-carbon wire at drawing.
Sub-lubricant agent Phoscon 521 technical specifications 2146-108-10964029-97, ed.1
Used for sub-lubricant coating at high or low-carbon wire before drawing. In comparison with borax it is much more economic in use and possesses higher capability of keeping grease.
Borax for drawing Phoscon 522, technical specifications 2146-206-10964029-2003
Intended for steel products coating while the cold-deformation processes.
SECTION III
SPECIAL PURPOSE PHOSPHATING CONCENTRATES
Phosphating concentrate Phoscon 13, technical specifications 2149-089-10964029-98, ed.1
Intended for steel surface phosphating to get wearproof manganese-phosphate coating and for oiling. Treatment method — dipping.
Phosphating concentrate Phoscon 20, technical specifications 113-07-45-07-88, ed.2
Intended for steel and iron surface phosphating to get wearproof manganese-phosphate coatings and before oiling for temporal metal protection for anti-corrosion coating. Sphere of application: gears, spur wheels, pistons, pitmans, bearing cages and so on. The coating provides high grease
keeping, decrease of mechanical tension, noise decrease while mechanism works, lessens time of working parts out and prevents parts gripping under tension in wide temperature range (40-80 C). Treatment method — dipping.
SECTION IV
LUBRICANT-COOLING LIQUIDS
CONSERVATION DRAW-DOWNS
Conservation grease Phoscon 651, technical specifications 0254-197-10964029-2003, ed.2
Intended for long secure protection of ferrous and nn-ferrous metals of any form and size kept under cover in severe and very severe environment by GOST 9.104-79.
SECTION V
DIELECTRIC AGENTS
Dielectric agent Phoscon 302 technical specifications 2149-068-10964029-2000, ed.2
Intended for the dielectric coatings for electrotechnics anisotropic steel.
Dielectric agent Phoscon 303 technical specifications 2149-144-10964029-2001, ed.1,2
Intended for the dielectric coatings for transformer steel in aggregates for dielectric coating application.
Dielectric agent Phoscon 305 technical specifications 2149-094-10964029-98, ed.1
Intended for the dielectric coatings for dynamo steel in aggregates for dielectric coating application. Used as inorganic component of inorganic varnish for organic isotropic steel coating.
Dielectric agent Phoscon 307 S7 technical specifications 2149-212-10964029-2004, ed.1,2
SECTION VI
INORGANIC BONDINGS
Concentrate Phoscon 350, technical specifications 113-08-606-87, ed.2-6
Used as a bonding in metallurgy at production of cast forms and rods, fireproof products, production of dyes for dying of mineral compound of roofing slate and coloured roofing slate on the basis of aluminium phosphates and borates. Used in production of refractories, ramming mixture, for the production of concrete masses, masonry mortar, for the production of earth molds and rods, as a antipyrine for wood and other combustibles treatment.
Bonding Phoscon 351, technical specifications 2149-150-10964029-01, ed.2
High-temperature bonding on the basis of aluminium and chromium phosphates is used as a bonding material in production of fireproof products in ceramic, metallurgical and building materials production.
Antipyrene-bonding Phoscon 352, technical specifications 2149-062-10964029-99, ed.1,2
Used as an antipyrene-bonding and formaldehyde acceptor in production of wood-fiber and wood-shaving boards in constnJction and construction technique.
Bonding Phoscon 353, technical specifications 2149-091-10964029-98, ed.2
Used as a hardening agent instead of orthophosphoric acid in cold-hardening mixtures at production of molds and rods, in fire-proof materials for the production of heat-resistant and building materials.
Phosphate bonding Phoscon 354, technical specifications 2’149-209-10964029-2004, ed.1
Intended for the usage in building materials production and for the production of anti-corrosion coatings.
Hardening agent Phoscon 355, technical specifications 2149-215-10964029-2004, ed.1
Used as a hardening agent for phosphate-bonding composition in casting.
SECTION VIII
OTHER PRODUCTS
Polymer agent FPSM-51, technical specifications 2149-054-10964029-2005, ed.1
Intended for anti-corrosion protection of steel products after phosphating
Phoscon 360 agent, technical specifications 2149-244-10964029-2005
Intended for hydrophobization of masonry.
Neutralizing phosphating agent Phoscon 488, technical specifications 113-08-362-87, ed.1,2
Intended for neutralization of metallic parts while phosphating process before the extrusion.
Phoscon 570, detergent with nonnormalized foaming. Intended for washing of cotton, linen and mixed fabrics at enterprises of municipal and laundry needs.
SECTION IX
PRESERVATIVES AND ANTIPYRINES
Wood bioprotection agent Phoscon 400, technical specifications 2149-194-10964029-2003
Intended for the protection of wood constructions, house walls, household buildings from decay, blueing and wood-boring animals separately or as bio-protective padding for VPC.
Wood bioprotection agent Phoscon 402, technical specifications 2149-207-10964029-2004
Intended for the bioprotection of wood constructions in severe environment (parts of poles, pollings, crossties, cooling stacks sprinklers).
Wood bioprotection agent HM-32, technical specifications 2149-118-10964029-2000, ed.2,3,4
Intended for the bioprotection of wooden constructions in contact with the ground and water parts of poles, pollings, crossties, cooling stacks sprinklers).
Wood bioprotection agent Phoscon 403, technical specifications 2154-208-10964029-2004, ed.1
Used for antisepsis of fresh-sawn wood materials for the period of outdoor drying or transporting in green. Also used for bioprotection of wood constructions and parts of buildings in Class 1-4 environment (GOST 20022.2).
Firebioprotective agent Phoscon-Kostroma-Plus, technical specifications 2149-201- 10964029-2004
Water soluble dry powder intended for treatment of wood constructions for their firebioprotective properties.
Phoscon-Kostroma-Premium — bloating fireprotective coating used for the protection of indoor wood constructions, buildings and constructions of industrial and civil assignation in the environment excluding the action of precipitation, with positive temperature and atmospheric moisture capacity of no more than 70%.
SECTION X
FIREEXTINGUISHING POWDERS
Fire-extinguishing powder Phoscon 430, technical specifications 2149-200-10964029-2003, ed. 1
Intended for fire-extinguishing of ABC classes and alive electrical installations up to 1000V. The powder can be used in all climate zones and temperatures from -50 to +50 C.
Fire-extinguishing powder Phoscon 432, technical specifications 2149-131-10964029-2000, ed. 5
Intended for Class B (liquids), C (gases) fire-extinguishing and alive electrical installations up to 1000V.
Fire-extinguishing powder Phoscon 433, technical specifications 2149-223-10964029-2004
Issued in two brands: A and B. Brand A intended for fire-extinguishing of ABC classes and alive electrical installations up to 1000V. brand B is not intended for Class A. fire-extinguishing powder Phoscon 433 is not intended for Class D fires. The powder can be used in all climate zones and temperatures from -50 to +50 C. Climatic test on the basis of UHL 4 GOST 15150.
Fire-extinguishing powder P-FKCS, technical specifications 2149-084-10964029-98, ed. 1,2,3,4,5
Intended for Class A (solids), B (liquids), ’C (gases) fire-extinguishing and alive electrical installations up to 1000V. The powder can be used in all climate zones and temperatures from -50 to +50 C.
All fire-extinguishing powders are certified by Russian MOE and are supplied with hygienic patent.